Category Archives: After-Sale Problems

image_pdfimage_print
26Jan/19
car radio turn off

How to Fix a Car Radio That Won’t Turn Off

It's only fair to share...Share on FacebookShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on TumblrShare on StumbleUponDigg thisShare on VK

There are some causes which will lead to a automotive radio not closing down once you expect it to, and every one applies to a fairly specific state of affairs. the foremost common reason for this drawback is Associate in Nursing improperly wired head unit, thus if you have got Associate in Nursing aftermarket radio, that may be your issue.

Other than that, you’ll have a controversy together with your electrical switch or another element, and there are some cars that are designed to permit the radio to remain on for a given quantity of your time, typically regarding 10 minutes, unless a door is opened 1st.

Some of the foremost common fixes for a automotive radio that will not shut down include:

car radio turn off

1, Improper head unit wiring

If the most power wire for the pinnacle unit is connected to an influence supply that’s perpetually hot, the radio will not ever shut down.

Fix: wire the radio to receive power from a supply that’s solely hot once the ignition is within the accent or run position.

2, Ignition switch drawback

If there’s a controversy with the electrical switch or cylinder, accent power is also out there even once the key’s removed.

Fix: check to determine if accent power is obtainable once the key’s within the off position. realine the cylinder or replace the electrical switch as required.

3, Worn out key or ignition cylinder

If your key or ignition cylinder are particularly worn, you will be ready to take away the key once the switch remains within the accent or on position.

Fix: ensure that the electrical switch is truly within the off position within the short term, and replace the cylinder once you will.

 

4, Radio designed to remain on for a collection quantity of your time

Some automotive radios are on a timer, in order that they are designed to not shut off straight off.

Fix: check if the radio has turned off some minutes once the doors are shut and fastened. If it still hasn’t turned off, check if the dome lights shut down once the doors are shut. this sort of drawback could require aid from an expert.

car radio wire

How an Ignition switch Prevents a Radio From Turning Off

In some cases, a foul switch or switch cylinder may additionally forestall a radio from turning off. the difficulty here is that, beneath traditional circumstances, accessories like your automobile radio solely receive power once the switch is within the accent, run, or begin position. If accessories are high-powered up once the switch is within the off position, your radio will not shut down.

The specific procedure for designation this sort of drawback are completely different looking on the create, model and year of your vehicle, and you’ll most likely should research a schematic drawing. In basic terms, once the switch is within the off position, the ignition accent wire shouldn’t have power. If there’s an adjunct relay within the circuit, it shouldn’t be activated with the switch within the off position.

If you are finding that accessories have power once they should not, the matter may be within the switch or the relay. the matter may even be within the mechanical ignition cylinder, that may be wiped out or misaligned.

 

 Radio Shut-Off Delay problems

Some cars include a feature that permits the radio to remain on once the keys are far from the ignition. This feature sometimes shuts the radio off once concerning 10 minutes or if a door is shut, though that isn’t a universal rule.

If you drive a automotive that was in-built the last ten or fifteen years, you’re experiencing this downside, and you’ve got an aftermarket head unit, you’ll wish to begin by checking your owner’s manual to determine if your vehicle will have this feature.

If you are doing have an issue that’s associated with a radio shut off delay feature, then each the designation and fix are likely to be outside the realm of a straightforward DIY job. If you notice that gap and shutting your doors ​don’t activate your dome light-weight, then you’ll be handling a faulty door switch, that is usually pretty straightforward to interchange.

In different cases, you’ll have an issue with a relay or different part. you’ll be able to try and take a look at or replace your accent relay, for example, however betting on your vehicle and what downside you’re truly handling, that will or might not fix the matter.

www.pdf24.org    Send article as PDF   
25Jan/19
car radio install

Car Radio Doesn’t Fit? Factors & How

It's only fair to share...Share on FacebookShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on TumblrShare on StumbleUponDigg thisShare on VK

When a new automotive radio doesn’t work properly, there are one or two of various factors which may be at work. If the new automotive stereo doesn’t work as a result of it’s the incorrect size, then a automotive radio work kit can facilitate in sure circumstances. for example, if you got a one DIN automotive radio to switch a 2 DIN automotive radio, then AN installation kit can do the trick. the other sometimes isn’t true, though, and work kits will even cause problems in some circumstances wherever some aftermarket automotive stereos won’t work into sure installation kits, and will cause a mussy looking dashboard.

vw radio

 

When a replacement car radio doesn’t match as a result of Size Matters

Factory car radio are available all kinds of freaky shapes and sizes nowadays, however there are 3 common kind factors for aftermarket head units that are all supported one DIN commonplace. The DIN commonplace for automobile radios specifies a height of 50mm and a dimension of 180mm, with no mention of depth.

Measured in inches, head units that adapt to the DIN commonplace are roughly 2″ tall and 7″ wide, despite the very fact that a hundred and eighty metric linear unit really converts to seven.08661 inches. that truly falls somewhere between seven 5/64″ and seven 3/32″, however there’s sometimes enough flexibility that some hundredths of an in. here or there don’t matter an excessive amount of.

The other 2 common head unit sizes are taken from the DIN commonplace. the most important is two DIN, that is just 4″ tall and 7″ wide, then there’s the less common one.5 DIN, that is regarding 3″ tall and 7″ wide.

Just watching those 3 common automobile car radio sizes, it’s simple to determine however you’ll find yourself with match problems at a awfully basic level. Head units engineered to the two DIN or 0.5 DIN specifications merely won’t slot in a slot meant for a one DIN head unit, and attempting to place a one DIN stereo within the house afforded a two DIN OEM unit can leave an unpleasant, open hole.

 

Solving automotive Radio match issues With Installation Kits

In most cases, the answer to a replacement automotive radio that doesn’t match could be a automotive stereo installation kit. in contrast to aftermarket head units, that are platform agnostic and designed to figure during a wide selection of cars and trucks, every installation kit is purpose-made for a awfully specific vary of makes or models.

The classic use for a automotive radio installation kit is to permit a one DIN aftermarket radio to suit into a touch that came with a a pair of DIN or one.5 DIN manufacturing plant stereo. this sort of kit includes a slot and mounting hardware which will match any one DIN aftermarket radio, whereas conjointly fitting utterly into the dash of the particular create, model, and year of your vehicle. In several cases, this sort of kit also will embody a storage pocket to create use of the additional space.

vw radio

 

When a automotive Radio Won’t slot in associate Installation Kit

Despite the very fact that aftermarket radios adapt nearly uniformly to one DIN, 1.5 DIN, 2 DIN dimensions, there are circumstances wherever you’ll realize that associate aftermarket head unit doesn’t truly slot in associate installation kit that it’s meant to figure with. this can be typically thanks to the slight distinction between the particular DIN customary, that is measured in millimeters, and therefore the accepted North American nation customary, that is given in inches since they don’t match exactly.

If associate installation kit from one manufacturer doesn’t work together with your new head unit, there’s a decent likelihood that a kit from a unique manufacturer can. This isn’t a very common prevalence, however if the build and model of your automotive is comparatively common or standard, you may usually be ready to depart potential problems by trying out net forum conversations to determine if anyone together with your specific automotive has full-fledged problems with a specific automotive stereo kit manufacturer within the past.

In some cases, it’s additionally that aftermarket head unit add associate ill-fitting install kit—or make associate ill-fitting install kit slot in the dash of your car—by shaving off a small little bit of material with a dremel tool, however that goes on top of and on the far side what most of the people are willing to just accept once putting in a replacement automotive radio.

 

Making Sure That a automotive Radio can work

If you’ve already bought a replacement automotive radio, and you either can’t or simply don’t need to come back it, then you’re visiting be stuck attempting to seek out a way to form it work. For those that haven’t nonetheless force the trigger on a replacement head unit, there are some ways that to form positive that the new radio are a decent work.

In several cases, the simplest way to confirm that a replacement automotive radio goes to suit is to truly live the recent automotive radio. Since most radios are either one DIN, 1.5 DIN, or 2 DIN, this is often really pretty simple to simply eyeball. however to form positive, you’ll simply pull out a measuring device and check. If it’s concerning 2″ tall, then it’s a one DIN, if it’s concerning 3″ tall it’s a one.5 DIN, and if it’s concerning 4″ tall it’s a two DIN.

If you’re shopping for a replacement automotive stereo as a present and don’t have access to the vehicle, or if the dash is meant in such some way that it’s tough to inform at a look however tall the stereo is, then the safest way to confirm you get the correct size replacement unit is to consult a work guide.

Most automotive stereo retail stores will facilitate your with this, however the knowledge is additionally offered on-line from retailers like Crutchfield and Sonic Electronix. employing a work guide from a estimable on-line merchandiser doesn’t need you to truly get from that merchandiser, thus it’s a decent way to get an inspiration of what’s going to really slot in your automotive no matter wherever you finish up shopping for your new head unit from.

www.pdf24.org    Send article as PDF   
22Jun/17

Essential Safety Features: Car DVD Players

It's only fair to share...Share on FacebookShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on TumblrShare on StumbleUponDigg thisShare on VK

If you’re in the market for a new car and you can afford a fully-loaded top-end model with all the bells and whistles, that’s great. But for the average Joe (or Jane), the price is a consideration and it’s difficult to sift through all the jargon car salesmen confuse you with. So, what are the essential safety features in cars that prevent accidents? Which new auto technologies are pure gimmicks and which ones save lives? Here are some essential safety features your car should have.

Airbags

autopumpkin-123

Even the least expensive cars these days have at least two front airbags. In the event of high-speed or high-impact collisions, airbags are only second to seat belts in saving the lives of front seat passengers. The latest auto technologies include airbags that deploy on the windscreen of the car to protect a pedestrian who may get hit while crossing the street.

Back-Up Camera

 

A dashboard display of what’s behind the vehicle comes on as soon as you put your car in reverse. Some back-up cameras include trajectory lines and distance readings to help you navigate, but more importantly, this technology prevents you from inadvertently running someone over (there have been instances when a parent backed up a large SUV over their own toddler in their own driveway). The National Highway Transportation Safety Administration (NHTSA) will make back-up cameras compulsory in all vehicles by 2018.

Fatigue Detection Systemsautopumpkin-123 autopumpkin-124

Drivers drifting off to speed are a danger to themselves as well as others on the road. New car technologies detect erratic driving, such as sudden deceleration or drifting, and warn the driver with an audio or visual alert. This safety feature is especially important for people who spend long hours on the road alone, such as truck drivers. More expensive models in passenger cars are able to profile a driver’s normal driving patterns and quickly detect any deviation from the baseline, even factoring in external factors such as road surface and crosswinds.

Parental Controls

Parents of teen drivers can rest a little easier when their young driver heads out of the door with car keys in hand. Parental control technology for safety in automobiles allows parents to place limits on the vehicle’s speed and audio volume. The system can also be programmed to sound a continuous alarm if seat belts remain unfastened after the vehicle begins moving. GPS vehicle tracking allows parents to track the vehicle in real time.

Blind Spot Detector

If you’ve ever started to switch lanes but jerked back into your lane because a car was in your blind spot, you’ll know the value of a new technology called blind spot detector. This feature sets off an audio or visual alert if there’s a car in the driver’s blind spot. Some systems can also detect bicycles and pedestrians outside the driver’s field of vision.

Car DVD Players: 

autopumpkin2644

Nowadays, there isn’t a home without a car DVD player, but one of the latest and coolest ways to electronically enhance your life is installing one into your car! Car DVD players come in all different varieties and prices, but even the cheapest ones will send you into movie viewer heaven!

View more products at our global online store: http://www.autopumpkin.com/
UK store: http://www.autopumpkin.co.uk
DE store: http://www.autopumpkin.de/

www.pdf24.org    Send article as PDF   
18Apr/17

Tips On Installing Android BMW Navigation System DVD Player

It's only fair to share...Share on FacebookShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on TumblrShare on StumbleUponDigg thisShare on VK

More and more BMW X5 E53 owners prefer to upgrading the factory car stereo with an aftermarket one which has DVD player and GPS navigation system built-in,such as Pumpkin Android BMW navigation dvd,wince 6.0 BMW navigation car dvd. And some of these people would like to install the new replacement by themselves, but there may be some problems during installation if you have never installed an aftermarket car gps dvd palyer before. We write this post to introduce you some tips on installation of Pumpkin android 5.1 BMW Car Navigation GPS DVD Player.

If your BMW X5 e53 just comes with factory car radio and CD player in dash, there’s a plastic cage inside of the dashboard as you can see after you take out the factory radio and CD, if you don’t remove this cage, you may think it does not fit into the opening of the original entry, the new BMW navigation dvd unit can not be pushed entirely into the dashboard, see pics below:

 

Don’t worry, there are two methods which can allow you to push the new BMW X5 navigation car dvd into the dashboard fully. Some installers just cut the plastic cage, and others remove it.

In order to remove the plastic cage, firstly take off the 4 screws that hold the cage in place, 2 on the right side, and 2 on the left side (same as right side). The following pictures are for your reference:

 

 

 

You need to pull down and slightly left the dash part which is close to the steering wheel. When you are doing this, use your other hand to push down in the middle of the opening where the cage is, and as you opened/pulled the dash/trim this far, you are able to hold it with one hand in this position and start wiggling the cage with your other hand. When are doing this, some force is necessary, but not too much. Once you start playing with it, you will get the jest on how to pull out the hooks, then as you have the left hook out, you now pull to a side and down on the right side (glove compartment side) to clear the other hook.

Once you removed the plastic cage, you are able to push into the new unit into the dash fully. And you will need to use the included iron frame support to fix the new unit to the dash, you may check the following photo as referrence.

If your BMW X5 E53 comes with factory navigation system, there’s a large screen in the dash, the 17pins(before year 2002) or 40pins(after year 2002) plug is not at the back of your factory radio, it’s located under the trunk, so you need to use a 5m long power cable with 17pins or 40pins plug to connect the correct plug under the trunk.

The following video may help you about that!

 

Pumpkin official websites:
German site: www.autopumpkin.de
www.pdf24.org    Send article as PDF   
07Apr/17

How to Install an Auto Overhead DVD Player

It's only fair to share...Share on FacebookShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on TumblrShare on StumbleUponDigg thisShare on VK

You want to make travel time more enjoyable for you and your little ones, so you decided on an entertainment system. Deciding to install an overhead DVD system can be rewarding in the long run, but complex in the beginning. A novice can complete this type of project, but some experience in this subject will make the process go more quickly. Either way you will save installation cost. You may also be able to seek installation support through the company you purchased the system from. Take your time and it will pay off on those long family travel trips.

Decide where you want to place the overhead DVD system. Determine the best position for everyone in the rear to easily see the DVD screen. You may need to remove your dome light.

Outline the bracket that came with the 2 Din Android Car DVD GPS on the headliner of your vehicle where you decided to place the overhead DVD player. Makes sure the outline is centered from both sides of the vehicle.

Partially drop the headliner of the vehicle. Only one side of the headliner needs to be dropped just enough to bring the wires through. Unscrew the driver’s side or the passenger side sun visor that the fuse box is located on. Disconnect the vanity light by gently pulling the connectors. Pry off the upper and lower pillar trim panel on the same side from which you removed the sun visor with the flathead screwdriver. You may need to remove the seat belt if it is attached to the upper pillar. The seat belt is usually secured with a head or Torx bolt. Remove any screws and retaining clips. Unscrew the kick panel over the fuse box and place the panel to the side.

Cut out the outline on the headliner. Ensure that a support beam runs across the area where you intend to mount the overhead DVD player. If there is no beam, you will need to glue the wood rail to the roof of the vehicle.

Use the bracket to mark at least four drill holes on the wood or support beam. Make sure to drill the holes centered on the beam.

Run the wires that came with the overhead DVD player through the headliner. Leave enough slack to connect to the DVD player. Follow the instructions and use the hardware that came with the overhead DVD player. Some units will requires you to connect all wiring to the DVD player before mounting. You will hide the wires behind the panels you removed.

Mount the bracket carefully using the short screws that came with the overhead DVD player. Connect the dome wires to the appropriate wires as described in the instructions that came with the overhead DVD player.

Connect the power and audio wires as detailed in the manufacturer’s instructions. All wires must be connected to a 12-volt source except the black one. It must be grounded. You can use any screw to ground the black wire. Use the wire crimper to cut the wires and use the electrical tape to secure wire connections. Place the FM modulator under the seat nearest to where you took off the panels.

Run the audio cable to the FM modulator. Set the modulator at one of the radio signals stated on the modulator. Securely place the wires loosely where the panels will be replaced. Secure all panels, seat belt and headliner back into place.

Tips & Warnings

Do not over tighten the car android dvd player. It could cause the screen to warp.
Installation can take up to four hours or more.

Want more infromation for the Latest Android Car DVD
Our online US online store: http://www.autopumpkin.com/
www.pdf24.org    Send article as PDF   
image_pdfimage_print